Technical specs
-Normal operating voltage voltage AC230V,50Hz
-Maximum load Max300W RC
-Frequency range 868.42MHz
-Wireless Range up to 30m line of sight

 

Basic Operations 
-The iTabletDim can be remotely controlled.
-The iTabletDim can be controlled by touch the face plate of this device, with on/off and dimming
function.
-The iTabletDim’s indicator light will indicate the status of the switch. 

 

Mounting
1. Turn OFF power by switching off the circuit breaker or removing the fuse and test that power is off before wiring!
2. Ensure iTabletDim’s capacity matches the load requirements. 
3. Wall Installation: please see below Wiring Diagrams. (Figure 2-3, Figure 3-3)
4. Reapply power to the circuit at fuse box or circuit breaker to test the system carefully, if the indicator light on iTabletDim keep breathing, it means the installation is in good condition.
5. Turn OFF the power again.
6. For Wall Installation: Fix your iTabletDim into switch box being careful not to pinch or crush wires, and secure it with screws. Reapply power to the circuit at fuse box or circuit breaker.

 

Download the Instruction Manual:

http://www.wintop.com/index.php/Index/download/?act=search&brand_id=2

 

Design Features
[]	Z-Wave
[]	868.42MHz EU
[]	230V AC 50Hz
[]	50 - 300W
[]	30% to 80%